Pneumatische Vetpompen
| Continuous-Duty Flow Rate | Maximum Fluid Pressure | Air Motor Effective Diameter | Operating Range | Approximate Air Use | Wetted Materials | Air Inlet Port Size | Material Inlet | Material Outlet | |
 |
Mini Fire-Ball 225, 50:1 | ||||||||
| 0.15 kg/min | 578 Bar | 57.2 mm | 3-10 bar | 0.2 m³/min @ 0.18 kg/min @ 7 bar @ 80 cpm | Steel, Urethane, Aluminium, Buna-N, Brass, Ethylene, Delrin | 3/8 in npt(f) | Slotted | 1/4 in npt(f) | |
|
Line Length: Up to 30.5 m Annual Usage: Up to 2,268 kg |
Dispense Points: 1 Typical Applications: Small maintenance facility |
||||||||
 |
Fire-Ball 300, 50:1 | ||||||||
| 0.54 kg/min | 580 Bar | 76.2 mm | 2.0-9.7 bar | 0.645 m³/min @ 7 bar | CS, Delrin, Buna-N, Ployurethane | 3/8 in npt(f) | Slotted | 1/4 in npt(f) |
|
|
Line Length: Up to 76.2 m Annual Usage: Up to 5,535 kg |
Dispense Points: 1 to 2 Typical Applications: High pressure grease to 579 bar |
||||||||
 |
Fire-Ball 425, 50:1 | ||||||||
| 1.5 kg/min | 517 Bar | 108 mm | 2.8-10.4 bar | 0.54 m³/min @ 4.8 bar |
CS, Leather | 1/2 in npt(f) | Slotted | 3/8 in npt(f) |
|
|
Line Length: Up to 76.2 m Annual Usage: Up to 9,072 kg |
Dispense Points: 4 or more Typical Applications: High pressure grease to 517 bar |
||||||||
|
Fire-Ball 425, 75:1 | ||||||||
| 0.88 kg/min | 517 Bar | 108 mm | 2.8-7 bar | 0.736 m³/min @ 7 bar | CS, Leather | 1/2 in npt(f) | Slotted | 3/8 in npt(f) |
|
|
Line Length: Up to 152.5 m Annual Usage: Up to 6,804 kg |
Dispense Points: 4 or more Typical Applications: High pressure grease to 517 bar |
||||||||
|
Fire-Ball 300, 15:1 | ||||||||
| 3 l/min | 186 Bar | 76 mm | 2.8-12.5 bar | 0.48 m³/min @ 7 bar | CS, AL, Leather, PTFE, Rubber | 3/8 in npt(f) | 1 in npt(f) Straight Inletted | 1/4 in npt(f) |
|
|
Line Length: Up to 76.2 m Annual Usage: Up to 4,535 kg |
Dispense Points: 1 to 2 Typical Applications: Medium pressure grease to 186 bar |
||||||||
|
Fire-Ball 425, 10:1 | ||||||||
| 13 l/min | 124 Bar | 108 mm | 2.8-12.5 bar | 0.37 m³/min @ 7 bar | Steel, Brass, Aluminium, Leather, Buna-N | 1/2 in npt(f) | Slotted | 1 in npt(f) |
|
|
Line Length: Up to 152.4 m Annual Usage: Up to 9,072 kg |
Dispense Points: 4 or more Typical Applications: High pressure grease to 124 bar |
||||||||
 |
Check-Mate, 14:1 | ||||||||
| 26.0 kg/min @ 60 CPM 500 cc per Cycle |
96.5 Bar | NXT 3400 |
7 bar max |
||||||
|
Line Length: Up to 30.5 m Annual Usage: Up to 9,072 kg |
Dispense Points: 1 Typical Applications: Small maintenance facility |
||||||||
|
Check-Mate, 26:1 | ||||||||
| 26.0 kg/min @ 60 CPM 500 cc per cycle |
179.3 Bar | NXT 6500 |
7 bar max | ||||||
|
Line Length: Up to 76.2 m Annual Usage: Up to 9,072 kg |
Dispense Points: 1 to 2 (simultaneous) Typical Applications: Smaller continuous duty, maintenance facility) |
||||||||
|
Check-Mate, 29:1 | ||||||||
| 13.0 kg/min @ 60 CPM 250 cc per cycle |
200 Bar | NXT 3400 |
7 bar max | ||||||
|
Line Length: Up to 76.2 m Annual Usage: Up to 9,072 kg |
Dispense Points: 4 or more Typical Applications: Medium continuous duty, maintenance facility |
||||||||
|
Check-Mate, 55:1 | ||||||||
| 13.0 kg/min @ 60 CPM 250 cc per cycle |
379.2 Bar | NXT 6500 |
7 bar max | ||||||
|
Line Length: Up to 76.2 m Annual Usage: Up to 9,072 kg |
Dispense Points: 1 to 2 (simultaneous) Typical Applications: Smaller continuous duty, maintenance facility |
||||||||
|
Check-Mate, 63:1 | ||||||||
| 5.2 kg/min @ 60 CPM 100 cc per cycle |
310.3 Bar | NXT 3400 |
7 bar max | 0.37 m³/min @ 7 bar | |||||
|
Line Length: Up to 76.2 m Annual Usage: Up to 9,072 kg |
Dispense Points: 1 to 2 (simultaneous) Typical Applications: Smaller continuous duty, maintenance facility |
||||||||
|
Check-Mate, 68:1 | ||||||||
| 10.4 kg/min @ 60 CPM 200 cc per cycle |
356.5 Bar | NXT 6500 |
7 bar max | ||||||
|
Line Length: Up to 152.5 m Annual Usage: Up to 9,072 kg |
Dispense Points: 1 to 2 (simultaneous) Typical Applications: Smaller continuous duty, maintenance facility |
||||||||